Tire Repair kit for Puncture - BAS Kuwait

Step 1: Locate and remove the object that punctured the tire.

Step 2: Apply rubber solution to the reamer tool, insert it into the hole (following the puncture direction), and work it up and down until it moves freely. This also cleans the hole.

Step 3: Thread one tire seal or rubber plug halfway through the hook tool and insert it into the hole, following the puncture direction.

Step 4: When only 1/2 inch of the plug remains outside, turn the hook tool 1/4 turn and slowly pull it out.

Step 5: Trim the excess plug as close to the tire as possible.

Note: If the puncture hole is too large, seek professional repair. Insert the plug at the same angle as the puncture hole.